Particle energy

If your electricity meter and HAN-porten

We have now replaced all the electricity meters.

Now all customers at Partille Energi received our new electricity meter - OMNIA® e-meter. With it, you can read your current electricity consumption yourself via the so-called HAN-porten on the meter. HAN is an abbreviation for Home Area Network, which simply means a connector for connecting your own equipment.

The electricity meter
HAN port
Reading
Outcomes
Meter display
Electricity meter

We have now replaced all the electricity meters.

All electricity meters in Partille have now been replaced with the new OMNIA® e-meter! This modern electricity meter gives you several benefits, including a new customer interface and support for HAN (Home Area Network), which makes it possible to connect equipment to monitor and control your electricity usage in a more convenient way.

The new electricity meters are also ready to handle produced energy from the start. This means that those who install solar panels do not have to wait for a meter change to be able to start using your self-produced electricity – an improvement that makes it easier to become your own electricity producer.

The electricity meter replacement was carried out to meet the new functional requirements from the Energy Market Inspectorate, which apply from January 1, 2025. The replacement has been carried out at no extra cost to you, as it is included in the electricity network fee.

We hope you get great use out of your new electricity meter!

HAN-porten

This modern electricity meter gives you several benefits, including a new customer interface and support for HAN (Home Area Network), which allows you to connect equipment to monitor and control your electricity usage in a more seamless way.

Using your own hardware connected to the electricity meter, you have the opportunity to monitor and control, for example, heating, hot water temperature or electric car charging throughout the day to optimize your energy use. The electricity meters are also able to handle produced energy from the start. This means that you do not have to wait for a meter change when, for example, installing solar cells, which was previously part of the process.

Your equipment needs to be compatible with the P1 standard. Updates in the interface are made at 1 second or 10 second intervals, allowing you to see your consumption in near real time.

HAN-porten is not active from the start for GDPR reasons. 

So you need to contact our Customer Service if you want to activate HAN-porten on your electricity meter. You can reach us at kundservice@partilleenergi.se or 031-336 96 60.

The changes were made so that we can meet the Energy Market Inspectorate's new functional requirements for electricity meters that apply from January 1, 2025.

Please read more about the functional requirements on the Energy Market Inspectorate's website.

Photo person at computer

Reading the electricity meter

Remote reading

In most cases, we read electricity meters via a signal on the electricity network (remote reading). When you are invoiced, you pay for your actual electricity usage and you avoid receiving surprise reconciliation invoices. This means that when you move, you do not need to read the meter.

We automatically take a reading on the day of your move. However, it is important that you notify us of your move well in advance before you move in and out.

Electricity bill

We normally invoice the electricity network fees every month. On your invoice from us you can see overall statistics for your electricity usage. On My Pages here on the web you can find more detailed information about your consumption, your agreement and your invoices.

If you find that you are using more electricity than you think is reasonable, it may be that electrical installations have been confused with one of your neighbors' meters. If electrical installations are confused, there may be several reasons for this.

Examples of causes

  • Incorrectly labeled on both meter board and facility ID.
  • Faulty connections in the building.
  • Removed covers for electrical panels (plug cabinets) during renovation that end up wrong when installed.
  • Incorrect apartment information when moving in or similar.
  • If you live in an apartment building, the meter panel and electricity meter are usually located in an electrical room or in a locked niche. Check with your property manager, property owner or whoever has a key to the space. Together you can then easily check and see if there may have been a fault.


Here's how you can check out the facility:

  • Compare the information on the invoice with the electricity meter's information about the facility ID and meter number.
  • Check whether the electricity meter number on the invoice matches the designation of the electrical switchboard (plug cabinet).
  • Check that the apartment number on the invoice matches the property's apartment list.
    Turn off the circuit breaker on the meter panel and check that there is no power in your home.

How your new electricity meter works

The new electricity meter is called OMNIA e-meter and is supplied by the company Kamstrup.

1. The yellow diode flashes when the meter registers energy.

2. The light indicates the status of the switch. When solid red, the switch is disconnected from Partille Energi, then the power is off for the property. If it flashes red, the meter is ready to turn the power back on. See also the description for the button under point 6.

3. Service port for Partille Energi.

4. HAN port (Home Area Network).
Is an open interface, a customer port that registers more data than just your consumption. You get access to the data by connecting to the customer interface. You can also connect equipment to the customer interface to, for example, control heating or charging an electric car. The equipment needs to be compatible with the DSMR 5.02 standard and the Energy Companies' recommendation v2 0-201912 (also called P1).
HAN-porten is inactive from the start.
Contact our Customer Service if you want to activate HAN-porten.

5. The network owner's locking wheel for sealing.

6. Power switch button.

  • Hold the button for 3 seconds to cut off the power.
  • Hold the button for 3 seconds to turn on the power.

On meters with meter fuses above 80 amps, there is no power switch and the button has no function.

7. Change the display, scroll to see different registers in the meter.

8. Display
Register 1.8.0 shows your total consumption and the current meter reading at that time.
Register 2.8.0 shows the current meter reading for your total production, what you export to the electricity grid if you have a production facility.

Omnia electricity meter with numbers

Meter display

OMNIA e-meter screen

8a. Displays a unique code for the selected register. 

8b. Lights up when the display shows something other than a measured value. 

8c. An error has occurred in the meter. Contact Customer Service. 

8d. Unit of the displayed measurement value.

8e. Signal strength for communication.

8f. Lights up steadily when the meter is in contact with the collection system.

8g. Not used.

8h. Not used. 

8i. Indicates that the connection cap is loose or there is an attempt at manipulation. 

8j. Shows the type of load. 

8k. Shows the sequence of rotation. 

8l. Indication of voltage on phase. 

8m. Direction of the current. 

8n. Field to display value, for example meter reading for consumption.

What can be shown on the meter display?

OBIS code Description Unit Imp/Exp Summary
1.8.0 Active energy Digit capacity. 6,3 kWh Import Vector sum.
3.8.0 Reactive energy Digit capacity. 6,3 kVArh Import  
2.8.0 Active energy Digit capacity. 6,3 kWh Export Vector sum.
4.8.0 Reactive energy Digit capacity. 6,3 kVarh Export  
1.7.0 Power L1, L2, L3 Instantaneous value kW Import Vector sum.
2.7.0 Power kW L1, L2, L3 Instantaneous value kW Export Vector sum.
32.7.0 Voltage phase L1 Instantaneous value V    
52.7.0 Voltage phase L2 Instantaneous value V    
72.7.0 Voltage phase L3 Instantaneous value V    
31.7.0 Current phase L1 Instantaneous value A    
51.7.0 Current phase L2 Instantaneous value A    
71.7.0 Current phase L3 Instantaneous value A    
1.0.0 Today's Date/Time   (Standard time)  
1.8.0.128 Energy Calibration Digit capacity. 5.4 kWh    
0.2.0 Firmware      
0.2.2 Firmware revision    

OBIS Description Unit Imp/Exp Summary
1.8.0 Active energy Digit capacity. 6,3 kWh Import  
3.8.0 Reactive energy Digit capacity. 6,3 kVArh Import  
2.8.0 Active energy Digit capacity. 6,3 kWh Export  
4.8.0 Reactive energy Digit capacity. 6,3 kVarh Export  
1.7.0 Power Instantaneous value kW Import  
32.7.0 Voltage Instantaneous value V    
31.7.0 Current Instantaneous value A    
1.0.0 Today's Date/Time   (Standard time)  
1.8.0.128 Energy Calibration Digit capacity. 5.4 kWh    
0.2.0 Firmware      
0.2.2 Firmware revision

OBIS Description Unit Imp/Exp Summary
1.8.0 Active energy Digit capacity. 7,2 kWh Import Vector sum.
1.8.0 Active energy Digit capacity. 7,2 kWh Import Vector sum.
3.8.0 Reactive energy Digit capacity. 7,2 kVArh Import  
2.8.0 Active energy Digit capacity. 7,2 kWh Export Vector sum.
4.8.0 Reactive energy Digit capacity. 7,2 kVarh Export  
1.7.0 Power kW L1, L2, L3 kW Import Vector sum.
21.7.0 Power kW L1 kW Import  
41.7.0 Power kW L2 kW Import  
61.7.0 Power kW L3 kW Import  
2.7.0 Power kW L1, L2, L3 kW Export Vector sum.
22.7.0 Power kW L1 kW Export  
42.7.0 Power kW L2 kW Export  
62.7.0 Power kW L3 kW Export  
33.7.0 Power factor Cos FI L1      
53.7.0 Power factor Cos FI L2      
73.7.0 Power factor Cos FI L3      
0.4.2 Transformer turnover      
32.7.0 Voltage phase L1 V    
52.7.0 Voltage phase L2 V    
72.7.0 Voltage phase L3  V    
31.7.0 Current phase L1 A    
51.7.0 Current phase L2 A    
71.7.0 Current phase L3 A    
1.0.0 Today's Date/Time   (Standard time)  
  Active energy Digit capacity. 5,2 kWh Import sec. Vector sum.
  Reactive energy Digit capacity. 5,2 kVArh Import sec.  
  Active energy Digit capacity. 5,2 kWh Export sec. Vector sum.
  Reactive energy Digit capacity. 5,2 kVarh Export sec.  
0.2.0 Firmware      
0.2.2 Firmware revision
Partille Energi logo with tag
Get tips, news and updates that make it easier to keep track of your energy.
I am interested in:
Customer?
1.0x